BeautyZir zirconia blocks factory tour

BeautyZir is the product trademark of Beautyzir  Technology  Co., Ltd. Beautyzir  Technology  Co., Ltd is a dental material production and sales company headquartered in China. The main product is dental zirconia ceramic blank. The company has 6  production lines of zirconia. Each year, 400,000 pieces of dental zirconia can be produced. The factory covers an area of about 30,000 square meters, of which 35% is green and is a green factory.

NAGY dental technology factory

The Beautyzir  Technology  Co., Ltd factory has a production area of 20,000 square meters, a variety of automated production equipment, good dust and sewage equipment to enable employees to have a safe and healthy working environment, in order to produce high quality products, each employee is happy every day. Work, they know that they are producing health and creating beauty for people all over the world.

dental zirconia blankdental zirconia blanksdental zirconia block

BeautyZir  is a product trademark of Beautyzir  Technology  Co., Ltd. Beautyzir  Technology  Co., Ltd is a company specializing in the research and development and sales of zirconia in China. We are committed to making zirconia available to everyone in the world who needs to repair their teeth. So we provide the world's cutting-edge technology products, the highest quality, and the best price,

BeautyZir zirconia dental blank material is divided into 5 series of products.

The HT series is white dental zirconia blank.

The HT series has the highest strength, the lowest transparency, the high strength is not easy to break, and it is not easy to be worn. It is suitable for the full crown and inner crown of the posterior teeth. As well as the implant opaque crown, this product has the lowest price and is also suitable for zirconia teeth makers who are just getting started.

The ST+ series is our most advantageous product, which gives the balance of zirconia to the extreme. The strength of 950mpa is enough to make any type of prosthesis, 40% transparency, can make the full crown of the posterior teeth, can also make the aesthetic restoration of the anterior teeth, simulate the transparency of the cut end, and most importantly, the price of this material is only A little higher than the saici series.  it is very suitable for technicians or laboratories who often use zirconia blanks for teeth. It is your best choice.

The UT series of zirconia is the ultimate product of our white zirconia ceramic block. Its transparency is 49%. It is crystal-clear and can be used to make an aesthetically pleasing anterior restoration with the honor staining solution. Transparent.


The ST+Color series is our pre-dyed zirconia block series,

BeautyZir zirconia blocks, can produce VITA 16 colors, the color is very accurate, can remove the dyeing process, save the laboratory time, and because this color is factory production Out, so the color will never fall off, the same color from the outside to the inside, avoiding the uneven dyeing of the technician,it is a material that can save labor costs, is liked by many laboratories,

ST+ML The series of zirconia blocks is the perfect pre-dyed multilayer zirconia. Its color has been adjusted by our developers for several years, and it has been continuously optimized into the current ST+ML series. We can ensure that the ST+ML is the most beautiful color on the market. Pre-shade zirconia products,

BeautyZir's dental zirconia blank was completed by tunnel sintering kiln pre-sintering. Why can we use this continuous tunnel sintering kiln because we have a large production capacity and we can't meet our needs with a simple sintering furnace? And the automatic tunnel kiln can make the temperature of each piece being sintered exactly the same. If the box kiln is used, the temperature of each position may change every time, the quality of the product cannot be guaranteed, so our products are very Good quality stability. Choose BeautyZir zirconia yes!

Honor zirconia's dental zirconia blank was completed by tunnel sintering kiln pre-sintering. Why can we use this continuous tunnel sintering kiln because we have a large production capacity and we can't meet our needs with a simple sintering furnace? And the automatic tunnel kiln can make the temperature of each piece being sintered exactly the same. If the box kiln is used, the temperature of each position may change every time, the quality of the product cannot be guaranteed, so our products are very Good quality stability. Choose honor zirconia yes!

And we have 6 such kiln, which can produce thousands of dental zirconia blocks every day.

 

Now let's see how Beautyzir zirconia blank is tested for size and weight. It's not just the size that meets the specification. Weight represents the uniformity of density. We use standard size and weight to ensure that the density of each piece is the same.